mobile-crusher-plant
WHEEL MASTER (WM) Series Mobile Crushing & Crushing Plant – Offering best in class Mobile Plants.

We are launching a new series of effective Mobile/Portable plants with different configuration to meet the demanding needs of customers/contractors in quarry, mining and recycling operations.

Highly flexible and economical solutions – fromcoarser to fine crushing and screening.

The WM series mobile plant can be operated as an independent single unit or a combination of various units together to provide best solutions for customer needs. The combination can be 2-stage, 3-stage or 4-stage crushing and screening in order to make the desired products. If required, a mobile screening station can be added to improve the product’s efficiency. Each unit is inter-connected through efficient portable conveyors for ease of installation and commissioning.

The WM series has proven equipment on board and has the flexibility for quick transportation, installation and dismantling arrangements. All equipment on board isfully cabled for ease of operation and power installation.

The WM is lightweight and the design is optimized to offer efficient crushing and screening performances and production at lowest cost/tonne.

Primary Wheel Master

Primary Jaw Crushing and Screening Plant

Model WM J2436 WM J3042
Crusher
Type Swing Jaw Crusher 2436 HD Swing Jaw Crusher 3042 HD
Motor 90 KW, 1000 RPM, Squirrel-cage type 110 KW, 1000 RPM, Squirrel-cage type
Belt ConveyorMotor
Length Belt Width Belt Width
(m) (mm) (KW)
6.5 800 7.5
Length Belt Width Motor
(m) (mm) (KW)
8 1000 11
Feed Station
Feeder Type VGF-900 x 4000, with 1.2 m long bargrizzly dual unbalanced motors VGF-1200 x 4200, with 1.2 m long bargrizzly dual unbalanced motors
Drive System 2 x 4.5 kW / 50 Hz / 1000 RPM 2 x 6.2 kW / 50 Hz / 1000 RPM
Nominal FeedHopper Volume 15 m3 18 m3

 

primary-wheel-master

Running Gear

2″ king-pin, leaf-sprung double-axle bogie, with air-brakes and running lights. 8 tyres 10″ x 20″ – 16 ply.

 

General Information

  • The feeder has adjustable grizzly section formed by fabricated Hardox / Sailhard bars. The nominal gap is adjustable from 80 mm up to 120 mm. It has a wire cloth screening element beneath the grizzly (858 mm wide x 810 mm long), to remove the natural fines.
  • The crusher by-pass chute collects material, which passes through the vibrating feeder’s grizzly section.
    A manual deflecting flap allows three possibilities:

~ Directs the intermediate and fine fractions to the delivery conveyor beneath the crusher.

~ Directs the intermediate and fine fractions to a separate fine stockpiling conveyor.

~ Permits the removal of fine material (taken out by a separate stockpiling conveyor) and allows the intermediate fraction to follow with the crusher product on the delivery conveyor.

  • The operator’s platform has handrails and access ladder from the ground. Safety guards are fitted to drives andaround the crusher’s flywheels.
  • Easy and quick displacement between job sites. Compact design and easy access to all equipment.
  • All the feed, discharge and connection chutes are robust constructions, made of steel plate with liner.
  • A junction electrical box is wired on board.
  • Local control push button on the operator’s platform for local control of the feeder.
  • A separate electric switchgear panel IP54 (protection class) and connecting cablin
    g (10 m) are providedas standard equipment. The freestanding control panel cabinet is placed on the ground during operation.

Secondary Wheel Master

Secondary Cone Crushing and Screening plant

primary-wheel-master1

 

Model WM C200 WM S200
Crusher
Type CC200 Cone Crusher CS200 Cone Crusher
Motor 132 KW, 1500 RPM, Squirrel-cage type 160 KW, 1500 RPM, Squirrel-cage type
Screen
Screen Type 1.8 m x 4.5 m Circular motion screen 1.8 m x 4.5 m Circular motion screen
Screen Size 1800 mm wide x 4500 mm long 1800 mm wide x 4500 mm long
No of Deck Triple Deck Double Deck
Drive System 22 KW / 50 Hz / 1500 RPM 18.5 KW / 50 Hz / 1500 RPM

 

 Wheelmaster-C200

 

Power System

Power system is electric, intended for connection to a main supply.

Model WM C200 WM S200
Total Power 162 KW 186.5 KW
Supply Voltage 415 V / 50 Hz / 3-phase AC 415 V / 50 Hz / 3-phase AC
Control Voltage 220 V / 50 Hz / 1-phase AC 220 V / 50 Hz / 1-phase AC
Weight 32 MT 36 MT
Operating Width 4.8 m 4.8 m

 

Running Gear

2″ King-pin, Walking Beam double-axle bogie, with air-brakes and running lights. 8 tyres 10″ x 20″ – 16 ply.

General Information

This Mobile Plant can be fed either directly on to the VSI crusher or alternatively on to the vibrating screen

The system is capable of producing 2 or 3 products as per system requirement.

The advantages of the system is as under:

  • The top deck oversize is feeding on to the VSI crusher.
  • The second deck oversize can have two options. The material can be taken out as a separate productor alternatively the same can be mixed with the second deck undersize.
  • The second deck undersize can have oneproduct or alternatively the deck can be split into two fractions enabling us to have two products.

The screen undersize chute has a manual deflecting flap as optional, which allows following possibilities:

  • Directs the intermediate and fine fractions to the delivery conveyor.
  • Directs the intermediate and fine fractions to a separate fines stockpiling conveyor.
  • The operator’s platform has handrails and access ladder from the ground. Safety guards are fitted to drives of crusher.
  • Easy and quick displacement between job sites.
  • Compact design and easy access to all equipment.
  • All the feed, discharge and connection chutes are robustconstructions, made of steel plate with liner.
  • A junction electrical box is wired on board.

Tertiary Wheelmaster

Tertiary VSI Crushing and Screening Plant

 

tertiary_wheelmaster

 

 

Model Model
Crusher
Type VS 3000 VSI Crusher
Motor Electric, 200 KW, 1500 RPM, Squirrel-cage type
Screen
Screen Type 1.8 m x 4.5 m III D circular motion screen
Screen Size 1800 mm wide x 4500 mm long
No of Deck Triple deck
Drive System 22 KW / 50 Hz / 1500 RPM

 

Power System

Power system is electric, intended for connection to a main supply.

Total Power 222 KW
Supply Voltage 415 V / 50 Hz / 3-phase AC
Supply Voltage 220 V / 50 Hz / 1-phase AC
Approximate Total Weight Electric, 200 KW, 1500 RPM, Squirrel-cage type30 MT
Operating Width 4.8m

 

Running Gear

2″ King-pin, Walking Beam double-axle bogie, with air-brakes and running lights. 8 tyres 10″ x 20″ – 16 ply.

General Information

  • This Mobile Plant can be fed either directly on to the VSI crusher or alternatively on to the Vibrating Screen
  • The system is capable of producing 2 or 3 products as per system requirement.
  • Advantages of the system are as under:

The top deck oversize is feeding on to the VSI crusher.

~ The second deck oversize can have two options. The material can be taken out as a separate product or alternatively the can be mixed with the second deck undersize.

~ The second deck undersize can have one product or alternatively the deck can be split into two fractions enabling us to have two products.

The screen undersize chute has a manual deflecting flap that allows the following possibilities:

~ Directs the intermediate and fine fractions to the delivery conveyor.

~ Directs the intermediate and fine fractions to a separate fine stockpiling conveyor.

  • The operator’s platform has handrails and access ladder from the ground. Safety guards are fitted to drives of the crusher.
  • Easy and quick displacement between job sites
  • Compact design and easy access to all equipment.
  • All the feed, discharge and connection chutes are robust constructions, made of steel plate with liner
  • A junction electrical box is wired on board

tertiary_wheelmaster11